DURALABEL 9000 DRIVER DOWNLOAD
Be seen from far and wide with the DL Choose your printer to get access to manuals, how—to videos, and driver downloads. The printer is not yet ready to print. Call Us Toll Free from the U. Check the Supply Loading First, check to make sure that the ribbon is feeding properly through the system. If this does not resolve the problem, please contact our support team for help. We just need to roll the ribbon into a fresh, unwrinkled area.
|Date Added:||2 June 2014|
|File Size:||50.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This will clear the internal memory and settings of the printer. Then, open your label design again and try printing it once more. The ribbon should roll down the back of the back roller, forward through the wide-open part of the printer, up across the metal print head, and onto the front of the front roller. You may also encounter this error if you are trying to copy a file to the SD card, but the filename has a space in it.
An instructional video demonstrating how to load DuraLabel ribbon and supplies is included on your installation CD. Go back to your label and try printing again.
It will feed out some label stock duralabrl this process; once it stops, you can safely open the printer, unlatch the print head, and roll the label stock back in.
Information about the DuraLabel , DL, SafetyPro 9G
Then, turn your Lobo back on again. To maintain optimal performance, the DuraLabel printer should be cleaned after every two rolls of supply. Turn off the printer using the switch in the back, near the black power cord.
Depending on the software you are using, we may have a quick answer for you — or we may know who will.
DuraLabel 9000 PS
Check the Supply Loading First, check to make sure that the supplies are lined up correctly inside the printer. It’s easy to load, reload and use the DL Click OK to save changes and close this window. Adjustable Media Guides white Adjustable media guides tted to width of vinyl supply Guide tted correctly Guide not tted correctly 2.
Open the printer and raise the print head mechanism, as if you were going to change all the supplies. Frequently Asked Questions Find your printer. All trademarks are the property of their respective owners. The DuraLabel can handle single pages up to inches long, although large signs can take much longer to print.
Page 15 Press down to close, with a hand on each side of the 99000 head mechanism.
Die-cut Label Printing Instructions C. Also See for Manual – 53 pages Quick start manual – 16 pages Quick start manual – 16 pages.
DuraLabel « Official DuraLabel® Store | Graphic Products
Choose your printer to get access to manuals, how—to videos, and driver downloads. How-to Install Floor Marking Tape. The roll of label stock should be centered on its spindle, and the material should unroll from the top of the roll. Contact us with questions about DuraLabel compatibility. Enter text from picture: Comments to this Manuals Your Name.
Remove any other rolls of label stock from the area of the printer, and click the Clear Error button to clear the error message and retry the print job. Ribbon Spindle back 2.
The printer may also print out the labels that you were waiting for.
Setting an Ethernet Port using the Diagnostic Tool Use the following steps to set a port with the diagnostic tool: You may need to change print settings to optimize the DuraLabel for printing with some ribbons and specialty supply. If the label still comes out blank, please contact our support team for help.
We want to earn your repeat business! If this does not resolve the problem, please duralahel our support team for help. Don’t have an account?